PREMIUM QUALITY OIL LUBRICANT – Fin Super oil lubricant is fortified with Interflon’s patented MicPol technology making it superior quality and unique. Fin Super’s industrial strength lubricant formula outperforms conventional oil lubricants. OUTSTANDING PENETRATING QUALITY – Fin Super can penetrate all pores and sub-pores of the application surface to be lubricated. This allows for exceptional lubrication on applications with very small spaces like inside of chains and sealed bearings. ANTI-CORROSIVE LUBRICANT – Lubricant deeply penetrates frozen parts and loosens seized and rusted parts. It silences friction-induced squeals and squeaks and prevents dirt accumulation and the formation of rust and other types of corrosion. WATER AND DIRT RESISTANT LUBRICANT- Holds up to high pressures, resists water wash-off and will not attract dirt, dust and other abrasives. This dry lubricant leaves a film after application that is water-resistant and repels dust, dirt and sand. NON-STAINING LUBRICANT - Fin Super goes on wet, cleanses, displaces moisture, breaks down deposits and penetrates even into the most inaccessible areas. After drying it leaves behind a lubricating dry film that does not stain and leaves no residue. USE FOR A VARIETY OF APPLICATIONS - Suitable for cleaning and removing rust. For the lubrication of chains, cables, housings, cylinders, spindles, hinges, shafts, rods, locks, tools, valves, sunroofs, measuring equipment, door seals, weapons, etc. PFAS-FREE & TEFLON-FREE OIL- Fin Super is completely free of PFAS and Teflon making it safer to use and compliant with global regulations. It is more sustainable and an excellent replacement for graphite and silicon spray lubricants. PATENTED TECHNOLOGY – MicPol is a combination of micronisation and polarisation. Mic: the components of the lubricant are so small that they penetrate all pores and sub-pores of the surface to be lubricated. Pol: during the production process, all components are given a charge ensuring unique adhesion to surfaces. High performance penetrating dry-film lubricant fortified with MicPol technology. Designed for a multitude of general lubrication applications on almost any moving part over a wide range of environmental conditions and when more than just a lubricant is needed. Goes on wet, cleanses, displaces moisture, breaks down deposits and penetrates even into the most inaccessible areas. Loosens seized, rusted and frozen parts, silences friction-induced squeals and squeaks and prevents dirt accumulation and the formation of rust and other types of corrosion. Sets up a clean, dry lubrication film that virtually eliminates wear on moving parts. Holds up to high pressures, resists water wash-off and will not attract dirt, dust and other abrasives. Instructions for use Shake before use. Parts should be cleaned first with a solvent or alkaline cleaning agent. Use aerosol from a vertical (upright or upside down) position only. Spray Interflon Fin Super (aerosol) onto parts such as cables and chains and allow to penetrate. Wipe off the excess lubricant with a clean cloth. Note: Do not use too much Interflon Fin Super (aerosol). Applying a thin layer, with occasional relubrication, gives a better result than a thick layer