Ideal for Multiple Surfaces: Suitable for sealing concrete driveway, walkways, patios, bricks, and decorative objects like benches, fountains, and birdbaths. Provides durable surface protection. Protection Against Water Damage: Helps block water absorption, supporting the longevity of concrete surfaces like driveways, brick walls, patios, and decks. Resists Harsh Conditions: Formulated to withstand exposure to de-icing salts, surface degradation, erosion, and wear, helping to maintain surface integrity. Breathable and Non-Yellowing Formula: Allows moisture to escape without trapping, offering long-lasting clarity that preserves the natural look of concrete, stone, and brick surfaces. Eco-Friendly and Easy to Apply: This water-based, family-safe sealer is easy to apply with a garden sprayer, roller, or brush for an effective finish. Fast-Drying and Water Repellent: Dries quickly to form a moisture-resistant barrier, aiding surfaces in withstanding the elements. Enhanced Surface Durability: Reduces the likelihood of surface cracking and erosion, enhancing the longevity of concrete surfaces. Built for All Weather Conditions: Helps concrete resist damage from weather variations, aiding in durability during extreme conditions. Professional-Grade Quality: Designed for both residential and commercial applications, offering reliable, high-performance surface protection. Clear, Non-Slip Finish: Provides a clear, non-slip finish that helps reduce dirt buildup, maintaining the natural look of both interior and exterior surfaces. Application: SHAKE WELL BEFORE USE. Review instructions carefully. Test a small area on each surface for suitability and desired results before application. Add one gallon of water to one gallon of Saavysil sealer with light mixing until a uniform white liquid forms. If the job cannot be completed on the same day, the liquid can be reused after mild mixing. Apply the Saavysil sealer using a brush, roller, or low-pressure sprayer. Apply the first coat to cover the entire area, then wait 10-15 minutes before applying a second coat. Two wet-on-wet coats are recommended for best results. On vertical surfaces, work from the bottom up, allowing for a 6-10 inch run down. Application temperature: Apply when the surface temperature is between 40°F and 95°F. Do not apply if rain is expected within 24 hours. Fresh concrete should be cured for 28 days before application. Coverage: Typical coverage is 175-250 sq. ft. per gallon, depending on surface porosity and texture. Surface Preparation: Clean thoroughly to remove dirt, oil, and old coatings to allow the Saavysil sealer to penetrate properly. Pressure washing with a detergent-based cleaner or mild acid wash may be used. Ensure the surface is dry with no damp patches. Repair cracks before application.