★ Round Rod Size --- Diameter: 10mm / 0.394"; length: 150mm / 5.9"; diameter accuracy: +/-0.05mm / 0.002"; Hardness: HRC61-63 ★ Wide Applications --- Widely used for machining gravers, drills, turning tools, milling cutters, shafts, punch needles, and center pins. Suitable for the processing of top circle, end face, hole, plane, step and groove on copper, aluminum and non-hardened steel parts. ★ Ease of Use --- Steel rods are easy to cut and form replacement parts for almost anything. Smooth surface, easy to form, no crack formation. Can be cut to any size you want. ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, good for a wide range of applications. Red hardness is the main characteristic of high-speed steel. ★ Useful Tips --- Warpage deformation does not affect use. It is not recommended for working environments that require high coaxiality. Reduce contact with air or do not expose to air to prevent rust. Add some anti-rust oil when storing. Attributes:
* Diameter: 10mm / 0.394"
* Length: 150mm / 5.9"
* Diameter Accuracy: +/-0.05mm / 0.002"
* Material: HSS (High Speed Steel)
* Hardness: HRC61-63
What Is Included:
* 1 Piece x Round Rods
Applications & Features:
--- Widely used for machining gravers, drills, turning tools, milling cutters, shafts, punch needles, and center pins. Suitable for the processing of top circle, end face, hole, plane, step and groove on copper, aluminum and non-hardened steel parts. Used on lathes. Reduce contact with air or do not expose to air to prevent rust. Add some anti-rust oil when storing.
--- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, good for a wide range of applications. Red hardness is the main characteristic of high-speed steel. Steel rods are easy to cut and form replacement parts for almost anything. Smooth surface, easy to form, no crack formation. Can be cut to any size you want.
Useful Tips:
--- Warpage deformation does not affect use. It is not recommended for working environments that require high coaxiality. Clamp with three-jaw chuck, and check the runout at the other end. If the length is 100mm, there may be 2mm of warpage.(Specifications below 10mm diameter or less are applicable.)
